Atria, Sloped ceiling installations – Casablanca Fan Company Atria C18GXXXF User Manual
Page 8
Atria
™
8
Sloped Ceiling Installations
When to Use an Extension Downrod
For optimum performance and appearance, use
an extension downrod with your Casablanca
fan when installing on high (cathedral) ceilings
or sloped ceilings. Casablanca offers accessory
downrods in increments of 6" up to 5’. See your
Authorized Casablanca Dealer for details.
Calculation of Ceiling Angle
Use the tear-off Ceiling Angle Template card inserted
in this manual. It provides you with a simple “go” or
“no go” for installing your fan on a sloped ceiling.
NOTE:
The fan may wobble or vibrate if the
downrod length is not long enough and the
inside blade is too close to the downslope or
side wall. Extending the downrod length will
usually solve this problem.
Suggested Extension Downrod Lengths
Ceiling Height
Downrod Length
9' 0"
standard
9' 6"
standard
10' 0"
12"
10' 6"
12"
11' 0"
18"
12' 0"
24"
13' 0"
36"
14' 0"
48"
15' 0"
60"
7' minimum
Blades must be a
minimum of 7 feet
above the floor
Extension
Downrod
Maximum angle
of Hang-Tru
®
canopy = 32º
This slope is less than 32º.
It is OK to install your fan.
This slope is 32º. This is the
maximum slope that will allow the
fan to hang straight down. It is OK
to install your fan.
This slope is more than 32º. Your
fan will not hang straight down; an
adaptor is necessary. Contact your
local Authorized Casablanca Dealer in
regards to purchasing a Sloped Ceiling
Adapter.
EXAMPLE 3
EXAMPLE 2
EXAMPLE 1