Kenwood SC102/2WH - Manual (Page 9)

TIMER CONTROL (some models)
This appliance may be fitted with one of two clocks. To determine which
instructions to follow refer to the diagrams of the display units.
If the following (jiagram is not identical to your display unit, please turn to page 10.
1. Timer symbol
2. Second oven neon
3. Grill neon
4. Main oven neon
5. Oven light neon
6. Fan‘on’neon
7. Oven light switch
8. Defrost switch
9. Timer button
10. Cooking hours button
11. Stop button
12. Manual symbol
13. Manual/automatic selector knob
14. Automatic symbol
15. Setting knob
Clock
The clock will operate even if the automatic
control is not being used. If the appliance is
switched off at the control panel, the clock
will stop.
When the electricity supply is first switched
on the display will flash at 00.00. Toset the
clock to the correct time, ensure that the
manual/automatic selector knob is in the
manual position. Press any two of the three
buttons, at the same time, turn the setting
knob until the correct time Is reached.
Release the buttons.
Minute Minder
To set, press the timer button, the digital
display will read 00.00, at the same time
turn the setting knob until the display
indicates the interval to be timed, release
the timer button. The display will now show
the time of day and an arrow pointing
towards the timer symbol. During the
operation of the minute minder, the
remaining time period can be shown in the
display by pressing the timer button. The
minute minder will sound intermittently, for
approximately two minutes, at the end of
the timed period. The sound can be
switched off by pressing any of the buttons.
Automatic Control
When using the timer control for the first
time it is advisable to let It operate while you
are at home. The displays can be checked
to show that it is operating correctly (see
Setting the Timer Control). You will then
feel confident to leave a meal to cook
automatically In the future.
Note
Delay and cook time must not exceed 23
hours 59 minutes.