Front view3 – Citizen Systems CLP-521 User Manual
Page 13
13
Setup
12
15
14
17
-1
16
-1
14
-2
16
-2
13
Part Names and Functions
= Thermal head
This is the printhead. Avoid touching this with your fingertips and leaving
grease or dirt on the printhead surface.
~ Platen
Interlocked with the thermal head, it feeds media backwards or forwards.
! Upper sensor (!-
1
) and bottom sensor (!-
2
)
When used as a transparent sensor (for labels and tags with notches), it
is used by matching the sensor markings of the upper sensor and the
bottom sensor. When used as a reflective sensor, it is used by matching
the sensor marking on the bottom sensor with the position of the black
mark on the liner or media backing.
@ Sensor arm
The media can be installed by raising this arm.
The media can be held in place by lowering this arm.
# Media guides
(Left fixed media guide (#-
1
) and right movable media guide (#-
2
))
The end of the media is matched to the left fixed media guide, then the
right side movable media guide is moved horizontally to match it to the
media size.
$ Optional unit connector cover
It is opened when the cables of the cutter unit and the peeler unit are
connected. Do not remove during normal use.