beautypg.com

Appendix b, Dip switch senings for your printer, Anadex 950c5-95c}1 – Apple Grr User Manual

Page 8: Centronics 7391, Epson mx-70, Epson mx-80: mx-8c5ft with graftrax-80, Epson mx-loo, I.d.s. 440g • 445g, Nec 8023, Malibu 200

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

APPENDIX B

DIP SWITCH SEniNGS FOR YOUR PRINTER

All printers must configure to a Centronics type

parailel interface.

ANADEX 950C5-95C}1

All switches on S-3 must be off. Set switches on S-1 and ‘
S-2 appropriately.

CENTRONICS 7391

All four switches must be off.

EPSON MX-70

Shorting plug must be hooked up to the red post for no
auto-line feed.

EPSON MX-80: MX-8C5FT with Graftrax-80

All switches on S-2 should be off. Dip switch S-1, switch 8

must be on and switch 3 must be off.

(

EPSON MX-lOO

S-2 switch 3 must be off

S-1 switch 6 must be off and switch 8 must be on.

I.D.S. 440G • 445G

S-4 switches 5, 6 and 7 must be off
S-3 switches 6 must be on and switch 7 must be off

Strapping for 44(3G-445G (located beside I.D.S.

cable connector)

9-6 - busy aotive when high

10-5 - strobe data on positive edge
14-1 - always remain instalied

NEC 8023

SW-1; 6 closed, 7 closed, 8 open. All others may be set

as user desires.

SW-2: 2 open, 5 open, 6 closed, 7 closed. All orners may

be set as user desires.

MALIBU 200

Bank A Switch 2 off and aii other switches are on.

•Nole; All swilches not mentioned can be set as user desires.

GRAPPLER™ PIN ASSIGNMENTS

Function

Normal

GRAPPLER

IDS

GRAPPLER*

I.D.S. 460G • 560G OR PRISM 80 AND PRISM 132

S-4 switch 5 must be off and switch 7 on
S-3 switches 6 and 7 off

Strapping for 460G-56®G (located beside I.D.S.

cable connector)

8-7 installed for parallel

11- 4 installed for busy rising high
12- 3 installed for negative going strobe

STB

1

5

D0

3

2

D1

5

25

D2

7

23

D3

9

21

D4

11

19

D5

13

17

D6

15

4

D7

17

-

ACK

19

18

BUSY

21

12

P.E.

23

22,26

SLOT

25

7

NIC

-

10,20

GND

ali others

all others

‘GRAPPLERs designed for use with IDS Paper Tiger printers may be

identified by a white asterisk on the upper right hand corner of the

board.

14

15

■"”WWr