Char-Broil 11301696 - Manual (Page 12)

9
10
Page 12
Place lid assembly on top of firebox then align hinge holes. Attach lid to firebox using 2 hinge pins . Once
hinge pins are in place, insert hitch pin into hole in hinge pins.
Attach lid handle to lid assembly using 2 handle bezels and two 1/4-20 x 3/4" screws and two washers as shown
below. Insert silicone lid bumper onto the two holes on sides of lid assembly.
Hinge pins
Hitch pin
(2 pieces)
(2 pieces)
Siilcone lid bumper (2 pieces)
Lid handle
26 mm dia. washer (2 pieces)
Handle bezel
(2 pieces)
1/4 - 20 x 3/4” screw
(2 pieces)