Transmitter programming, Code and 4 flashes for the 4 – Crimestopper Security Products COOLSTART RS900ER User Manual

Page 8

TRANSMITTER PROGRAMMING

TRANSMITTER PROGRAMMING:

Note: All transmitter codes must be learned at time of programming!! The RS900 allows storage of up to 4
different transmitter codes.
1. Open Hood.
2. Turn key to the ON position. (Doors will lock if Autolock is programmed)
3. Press Programming button 4 times, then after a few seconds the unit flash the parking lights 4 times.
4. Press button #1 of the transmitter to be coded. You should get 2 light flashes indicating the unit is waiting for a

code, then press button #1 of a second transmitter, the unit will flash 3 times indicating its waiting for the 3

code and 4 flashes for the 4

code. If all 4 codes are learned, the unit will automatically exit code learning mode,

otherwise turn key off and close hood.

TRANSMITTER PROGRAMMING:

IGN

OFF

WAIT FOR

4 FLASHES

PRESS 4X's

2, 3, OR 4 FLASHES

START

RIM E

TOPPER

CRIMESTOPPER SECURITY PRODUCTS, INC. 1770 SOUTH TAPO ST. SIMI VALLEY, CA. 93063
RS900III OPS REVA 07.14.00

This manual is related to the following products:

COOL START RS-901