beautypg.com

Operating the remote transmitter (rs900er only), Remote engine control – Crimestopper Security Products COOLSTART RS900ER User Manual

Page 2

background image

OPERATING THE REMOTE TRANSMITTER (RS900ER ONLY)

The transmitter supplied with this system has Four (4) buttons / channels. The button configuration is Factory-
set and unchangeable.


REMOTE ENGINE CONTROL

REMOTE ENGINE STARTING - SUCCESSFUL START:
1) Press remote start button or for RS901 model activate Green Start input wire.
2) Parking lights flash once, then turn on solid, Ignition/Acc On.
3) After 6 seconds Starter Motor engages, Parking lights and Acc circuits turn off while cranking.
4) Engine Starts and Runs. Parking Lights and Acc turn back on, Doors Lock.
5) Engine will remain running for programmed run time until reset with Brake pedal. If needed, the engine can be

turned off with remote transmitter or for RS901 model, activating the Green Start input wire.

AFTER

IGN

6

STARTER

THEN

START

FLASH 1X

SOLID

SOLID

SEC.

#3

#1

#2

#4

START

LOCK

TRUNK

REMOTE

START

UNLOCK

C

RIM E

S

TOPPER

POP

NOTE: When using the optional
Starter Disable feature without
power door locks, be certain to
install the supplied L.E.D. which
will be your only indication that
the Starter Disable is active. You
must press the UNLOCK button on
the transmitter if the L.E.D. is
flashing or the vehicle will not
start.

This manual is related to the following products: