Clarion APX600.5 - Manual (Page 3)

DESCRIPTION
The Clarion APX600.5 five channel car audio amplifier is an excellent choice
for creating a variety of multi-channel sound systems. It features built-in
system design flexibility that allows you to create a 3, 4, or 5 channel amplifier
system with a flip of a switch. You can also configure the front, rear and
subwoofer amplifier sections to drive a set of satellite speakers and/or
subwoofer.
The built-in 12 dB per octave electronic crossover lets you custom tailor the
sound of the front and rear channels, using two independent filters with
adjustable crossover frequencies for high-pass or low-pass filtering.
The amplifier also uses an unregulated MOSFET power supply for superior
control of output wattage. A toroid-coil transformer yields maximum power
transfer with minimum heat loss. Careful circuit design keeps AM RFI at low
levels, so you won’t hear unwanted noise when the level is cranked up.
Protection circuits safeguard the amplifier when overheating, speaker shorts or
improper load conditions occur.
The main connections and controls are on the end panels and are easy to
understand. System configuration switches and signal flow chart are on the
bottom panel of the amplifier. Gold-plated RCA and barrier connectors are
used to ensure the best electrical connection for your system.
INPUT CONNECTIONS AND AUDIO CONTROL
The front panel of the APX600.5 contains connections for High / Low Level
Inputs and Audio Adjustments as shown below.
OWNER'S MANUAL
3
DE
SCRIPTION
1 Speaker High Level Inputs
2 Rear RCA Input Jacks
3 Front RCA Input Jacks
4 Sub RCA Input Jacks
5 Gain Controls
6 Rear Hi / Low Frequency Control
7 Front Hi Pass Frequency Control
8 Sub Low Pass Frequency Control
9 Power Indicator
0 Rear Hi Pass Frequency Control
q Front Frequency Multiplier Switch
w Subwoofer Bass Boost Control
Figure 1-