Clarion DVS9755z - Manual (Page 21)

DVS9755z
27
10. SPECIFICATIONS
DVD player section
System: Digital Versatile Disc System with CDDA
Capable
Usable Discs: DVD Video Disc, Compact Disc
Frequency Response: 20 Hz to 20 kHz (± 1 dB)
Signal to Noise Ratio: 100 dB
Dynamic Range: 100 dB
Distortion: 0.01% THD
Channel Separation: 80 dB
Audio section
S/N: 100 dB (digital input)
100 dB (analog input)
Frequency characteristics: 20 Hz to 20 kHz
(±1 dB)
Separation: 90 dB (digital input)
80 dB (analog input)
High frequency distortion: 0.01% (digital input)
0.01% (analog input)
Analog output :4.0 Vrms (VOL Max)
Analog input :2.0 Vrms (Max)
Digital input :44.1 kHz sampling,
16-bit digital audio data
DSF : 6 modes
P.EQ : 3 bands x 2 (front/rear independent)
Fo; 20 Hz to 20 kHz
1/3 octave steps
Q; 1 to 20
G; ± 12 dB
Preset front; 6 types
Rear; 7 types
Subwoofer voltage gain; +12 dB
(M.VOL MAX)
LPF Fo; 50 Hz, 80 Hz, 120 Hz
LPF slope; 12, 18, 24 dB/oct
General
Source unit
Power Supply Voltage:
14.4 V DC (10.8 to 15.6 V allowable)
Ground:Negative
Current Consumption : Less than 3 A
Weight: 3.5lb. (1.6 kg)
Dimensions:
7” Width X 2” Hight X 6-5/8” Depth
(178 mmWidth X 50 mm Hight 165mm Depth)
Remote control unit
Weight: 1oz. (30 g) (including battery)
Dimensions:
1-7/8” Width X 5-9/16” Hight X 1-1/4” Depth
(47 mm Width X 142 mm Hight 32 mm Depth)
Note:
• Specifications and design are subject to change
without notice for further improvement.
List of accessories
1. DVD disc unit ............................................... 1
2. Control unit .................................................. 1
3. Owner’s manual .......................................... 1
4. Warranty ...................................................... 1
5. Control unit cord .......................................... 1
6. Power supply harness ................................. 1
7. Parts bag (1)
• Set screws (M2.6 x 4) ................................. 1
• Cord clamps (small) .................................... 1
• Double sided tape for securing brackets ... 2
• Cord clamps (large) ................................... 3
• Cord holders .............................................. 2
• Velcro tape (large A) .................................. 2
• Velcro tape (small B) .................................. 2
• Set screws (M5 wing nuts) ......................... 4
• Installation bolts (M5 x 6) ........................... 4
• Double sided tape for securing the remote con-
trol holder .................................................... 1
• Installation bolts (M5 x 6 counter sunk) .... 4
8. Parts bag (2)
• Hook plate ................................................... 2
• Spring .......................................................... 2
• Rubber cap ................................................. 1
• Special screw ............................................. 1
• Screw (M5 x 6) .......................................... 1
9. Bracket with bolt .......................................... 2
10. Main unbracket .......................................... 2
11. Batteries (type AAA) for remote control .... 2
12. Remote control .......................................... 1
13. Remote control holder ............................... 1
14. Installation ................................................. 1
15. Universal mounting bracket ...................... 1
16. Strap .......................................................... 1
17. Outer escutcheon ...................................... 1