Attaching fastening rails – Bosch NKT 72 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Attaching Fastening Rails
used for both NKT 72 and NKT 92 series
To attach the fastening rails:
1. Mark the center as shown in drawing.
2. Align rails using notch.
3. Secure the rails tightly using screws.
Note: a. The top flange of rail must sit tightly
against the counter top,
b. If counter top is tiled, the lower
screws holes in the rails should be
used.
SPECIAL NOTE;
Use plugs or sleeves for screws or glue rails in
place, using a temperature resistant two component
adhesive which is suitable for bonding metal to
stone, when installation is in granite or marble
counter top.
Important:
• Do all counter top preparation-before
installing the cook-top. Be sure to clean area
after cutting and before installing cook-top.
Chips, and other debris from cutting of the
counter may impair the function of electrical
components.
• Seal the cut surfaces with silicone rubber,
heat resistant enamel or casting resin, to seal
the surface against moisture,
,