Citizen Systems Line Thermal Printer CT-S601 - Manual (Page 21)

— 18 —
1. Turn off the power.
2. Orient the interface cable correctly and insert it into the interface connector.
Ethernet and Powered USB interfaces are available as options in addition to
those listed here.
3.2 Connecting Interface Cables
CAUTION
„ Always unplug the AC adapter from the printer before connecting the printer to a
Powered USB interface. Failure to do so may damage the host PC. For information
about installing a Powered USB interface, contact your Citizen Systems dealer.
„ When disconnecting the cable, always hold the connector.
„ Be careful not to insert the USB interface cable into the cash drawer kick-out
connector.
„ To connect more than one printer to a single computer via a USB interface you must
change the serial number of the USB interface.
Serial interface Parallel interface
USB interface (hub type) USB interface