Citizen Systems Line Thermal Printer CT-S601 - Manual (Page 16)

— 13 —
z Power switch
Press this button to turn the power on or off.
z Maintenance cover
Not applicable for this product.
Operation panel
z POWER LED (green)
Lights when the power is on, turns off when the power is off.
Flashes when data is incoming or a memory error has occurred.
z PAPER LED (orange)
Lights orange when paper is low (paper near-end) or there is no paper (paper
end).
z ERROR LED (red)
Flashes if the print head is hot, the paper cover is open, a cutter lock occurs,
and so forth.
z FEED button
Press this button to feed paper.
In case of a cutter lock, remove the cause of the lock, close the paper cover,
and then press the FEED button.
The printer enters the mode for setting memory switches and running self-
printing.
CAUTION
Do not open the maintenance cover.
Refer to 4.4 Self-printing
Refer to 4.6 Error Messages
Refer to 5.3 Manual Setting of Memory Switches
POWER LED (green)
PAPER LED
(orange)
ERROR LED (red)
FEED button