Char-Broil 463250511 - Manual (Page 15)

15
6
5
On back of grill, place upper back panel between side panels and above lower back panel. Secure upper back panel in
lower holes using one 1/4-20x1½” screw and fiber washer on each side.
Do not fully tighten screws until side shelf installation is complete in later steps.
1/4-20x1½”
screw
fiber washer
Insert front brace under control panel and between cart side panels. Make sure door hinge pins are on the top side and
facing the front.
1/4-20x1½”
fiber washer
screw
Door
Hinge Pin
for clarity of illustration
Note: some parts omitted
Front brace
Upper back panel
Secure upper holes using one 1/4-20x1½” screw and fiber washer on each side.
Secure lower holes using one 1/4-20x1½” screw on each side.