Pioneer AVM-P7000R - Manual (Page 44)

Audio Adjustment
2. Select the frequency to 50 Hz, 80 Hz or 125 Hz.
n 8 © 0 2 * 3 4 "
C O R V E T T E
S U B . m i _____ U P
A
FBEQ.
M —w
mm
--- ^ LEVEL
-------- FREQ.
S U i l R 5 0 8 0 1 2 5 1 2 5
The selected frequency is
displayed.
3. Increase or decrease the output level.
6 /3 e © 0 2 * 3 4 “ i
C O R V E T T E
S U B . 1 ^ 2
level
.........A\V ^*6
----------- FREO.
sum :. 5 0 8 0 1 2 5 1 2 0
UP
l^lM
FREfi.
M ------
DOWN
The display shows “+6”
“-6”.
Note:
• You can select the subwoofer setting mode only when subwoofer output is switched ON in the
“SUBW.l” mode.
Front Image Enhancer Function (FIE)
The F.I.E. (Front Image Enhancer) function is a simple method of enhancing front imaging
by cutting mid- and high-range frequency output from the rear speakers, limiting their out­
put to low-range frequencies. You can select the frequency you want to cut.
Precaution:
• When the F.I.E. function is deactivated, the rear speakers output sound of all frequencies, not
just bass sounds. Reduce the volume before disengaging F.I.E. to prevent a sudden increase in
volume.
1. Press the AUDIO button and select the F.I.E. mode (FIE) in the Audio
Menu.