Pioneer AVM-P7000R - Manual (Page 21)

PI Seek Function
The tuner searches for another frequency broadcasting the same programming. “PI SEEK”
appears on the display and the radio volume is muted during a PI Seek. The muting is dis­
continued after completion of the PTSeek, whether or not the PI seek has succeeded. If the
PI Seek is unsuccessful, the tuner returns to the previous frequency.
PI Seek
If the tuner fails to locate a suitable alternative frequency or if the broadcasting signal is
too weak for proper reception, the PI Seek will automatically start.
Auto PI Seek (for preset station)
When preset stations cannot be recalled, as when traveling long distances, this product can
be set to perform PI Seek also during preset recall.
The default setting for Auto PI Seek is OFE.
Note:
• Refer to “Initial Setting Menu” for details on how to switch Auto PI Seek ON/OFF.
Regional Function (REGIONAL)
When AE is used to retune the tuner automatically. Regional (REGIONAL) limits the
selection to stations broadcasting regional programs.
Note:
• Regional programming and regional networks are organized differently depending on the country
(i.e., they may change according to the hour, state or broadcast area).
• The preset number may disappear on the display if the tuner tunes in a regional station which dif­
fers from the originally set station.
Activating the Regional
The Regional function can be turned ON independently for each EM band.
1. Press the FUNCTION button and select the Regional mode (REGIONAL) in
the Function Menu.
2. Activate or deactivate Regional while in an FM band.
“REG”