Exhaust filter removal and replacement, Motor filter removal and replacement, Warning – Kenmore 401.39000 User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
MOTOR FILTER REMOVAL AND REPLACEMENT
The motor filters(foam filter, micro
filter) are located underneath the
dust bin. If the filters become dirty,
remove and clean them.
The motor filters(foam filter, micro filter)
may be hand washed in cold water with
mild detergent. Rinse well and air dry
thoroughly before re-installing.
EXHAUST FILTER REMOVAL AND REPLACEMENT
A
WARNING
Electrical Shock and Personal Injury
Hazard
Disconnect electrical supply before
servicing or cleaning the unit.
Failure to do so could result in
electrical shock or personal injury
from vacuum cleaner suddenly
starting.
Note
: Inspect the exhaust filter
regularly for dust accumulation,
and clean if necessary.
Grasp tab on exhaust filter cover and
pivot forward to remove.
Remove exhaust filter from cover. Hold
exhaust filter under running water to
wash. Allow exhaust filter to dry for at
least 24 hours.
Return exhaust filter to cover and
reattach to cleaner.
1 1