To fit the display, To remove the display, To fit the display to remove the display – Pioneer AVD-505 User Manual
Page 5: Fitting and removing the display
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Fitting and Removing the Display
Precaution;
• To prevent failure, be sure to turn the ignition switch or system power OFF before fitting or
removing the display. Also take care not to grip the screen or buttons too firmly or to drop the
display.
• Do not let any water get on the terminals on the display or on the base and do not allow the ter
minals to be shorted by a metal object or the like. This can cause system breakdown.
• Be careful not to touch terminals on the display or on the base. Doing so may cause connection
failures. If any terminals are stained, wipe them with a clean dry cloth.
To fit the display
1. Fit part ® of the display into the
grooves
(D
on the left and right of
the base.
2. Slide the display downward until it
clicks into place.
To remove the display
Pull the lock release lever (3)
upward and hold in that position,
then slide the display upward and
detach it from its base.
• To prevent theft of the display, remove
the display when leaving the vehicle.
Base