Kenmore 309000845 - Manual (Page 7)

Air Conditioner Features
(continued)
STEP 5 — TO OPERATE
ON FAN ONLY:
DO THIS:
PRESS ON
(if not running)
PRESS
FAN ONLY
CHOOSE ONE
YOU WILL SEE:
Note: Use this function only when cooling is not desired, such as for room air circulation or to exhaust stale air.(remember to
open the vent during this function, but keep it dosed during cooling for maximum cooling efficiency.) You can choose any fan
speed you prefer.
During this function, the display wilt show the actual current temperature, not Ifie set temperature as in the cooling mode.
STEP 6 — TO USE THE POWER
SAVER FEATURE:
DO THIS:
PRESS
POWER SAVER
Note; In this mode, when the compressor shuts off, the fan will continue to run for another 3 minutes, then shut off until
coding is needed, as sensed by the room temperature control. During this time, it may come on for 3 minutes to sense whether
cooling is needed, then it will go off for 10 minutes. It will continue doing this to sample the room air for as long as necessary.
STEP 7 — TIMER-DELAY
STOP FEATURE
DO THIS:
PRESS
(if unit is not
running)
’ PRESS
YOU WILL SEE:
Note; The unit must be running to make this setting.
Proceed as in step 9 to change the desired number of hours, before the control will time out and turn off.