Curtis DVD3602UKT - Manual (Page 11)

Helpline No . UK/Northern lr ela nd 0800 032 5264 Rep. lr ela nd 1800 315 697
W eb S upport www.curtisint.com
Model Number:
DVD3602UKT
Helpline No . UK/Northern lr ela nd 0800 032 5264 Rep. lr ela nd 1800 315 697
W eb S upport www.curtisint.com
Model Number:
DVD3602UKT
F: Connecting to an external decoder or a power amplifier
When DVD discs recorded in Dolby digital, MPEG audio or other formats are played, corresponding bit
stream is output from the player s COAXIAL digital audio output connector. When the player is
connected to an external decoder or a power amplifier, you can enjoy quality of theatre level at
your home!
,
CD
DVD
MP3
Sound
recording format
Dolby digital
DTS
Linear PCM
Other
MP3
Linear PCM
Digital output setting
PCM(44.1KHZ sampling)*1
Raw
OFF
Raw
OFF
PCM(44.1KHZ sampling)
PCM(44.1KHZ sampling)
PCM(44.1KHZ sampling)
PCM(44.1KHZ sampling)
*1 sound having 192KHz sampling is converted to
48KHz sampling when it is output from the Coaxial
digital audio output connector.
Please refer to the setup operations for setup
method.
Note:
For your reference:
Caution for the coaxial audio output connector.
Dolby Digital (AC-3),a digital sound compression
technique developed by the Dolby Laboratories
Licensing Corporation supports 5.1-channel surround
output and stereo sound system enables the capacity
of mass storage recorded in discs Linear PCM is a
signal-recording format used in CD s While CD s are
recorded in 44.1KHz/16bit, DVDs are 48KHz/16bit
up to 192KHz/24bit.
Do not connect an amplifier (with an Coaxial digital
input connector) which does not contain the Dolby
Digital (AC-3) or MPEG audio decoder, otherwise it
maybe harmful to your ears and damage your
speakers, Choose RAW in the digital audio setup
to activate coaxial or optical output when playing disc
with DTS output.
BASIC CONNECTION
10
TV set(optional)
S-Video cord
(optional)
Euro SCART
(optional)
Video/audio
(optional)
DVD/CD player
Coaxial audio
cord
Decoder of
amplifier with
Dolby digital
(AC-3) or MPEG
(optional)
REMOTE CONTROL PREPARATION
Remoto control sensor
Among 5 meters
30 30
11
Battery Installation
Service life of batteries
Notes:
Insert the batteries while observing the positive (+)
and Negative (-) polarities as Figure A.
The batteries normally last for a year although this
depends on the operation and on how often the remote
control is used.
If the remote control unit fails to work even when it is
operated near the player, replace the batteries with
new ones. Use size AAA UM-4 batteries (2 pieces).
Do not use rechargeable (Ni-Cd) batteries.
Install batteries correctly observing the (+/-) polarity
signs.
Do not drop, step on the remote control, otherwise
it may damage the parts or lead to malfunctioning.
Use only the recommended battery type or equivalent
(voltage and size).
Always replace a complete set of batteries at the
same time.
Do not mix batteries of different types.
Never mix new and used batteries in the same
compartment.
Remove exhausted batteries immediately.
Remove batteries when product is not in use.
Do not dispose of batteries in fire as they may explode.
Do not recharge non-rechargeable batteries.
Do not short circuit the supply terminals.
Ensure batteries are stored away from metal objects
as contact may cause a short circuit.
Remote control operation range is no more than 5 m
from and within about 60 degree wide in front of the
unit (Figure B).
Do not point bright lights to the remote control sensor.
Do not place objects between the remote control and
the remote control sensor.
Do not use this remote control together with the
remote control of any other equipment.
Notes:
Y Pb/Cb Pr/Cr
L R COAXIAL
HDMI
S-VIDEO OPTICAL
VIDEO
SL SR CEN
FL FR SW
SCART OUT AUDIO
POWER
DVD3602UKT DVD/CD/MP3/MPEG4 PLAYER
OPEN/CLOSE PLAY/PAUSE STOP
5.1 CH
(optional)
POWER OPEN/CLOSE
OSD P/N REPEAT A-B
SHUFFLE VIDEO SUBTITLE ANGLE
1 2 3
4
5 6
7 8 9
0 10+ +10 TIME
MUTE SLOW
STEP L/R
SETUP AUDIO
ENTER
TITLE MENU ZOOM USB/CARD
PBC PAUSE PLAY STOP
REV PREV NEXT
16:9/4:3 VOL
PROG
DVD3602UKT
RESET RETURN
F
Remark:
Batteries (battery pack or batteries installed)
shall not be exposed to excessive heat
such as sunshine, fire or the like.