Kenmore 465.1333 - Manual (Page 8)

L
oading
General Recommendations
• Items can be centered behind a single tine or loaded
at an angle to maximize space.
• Avoid blocking or preventing the spray arms from
spinning freely. Do not allow items to extend beyond
the racks.
• Face soiled surfaces toward the center of the
dishwasher.
• Do not load anything above the inside top edge of
the drawers. This rack can accommodate items up to
11” [25.4 cm) in height.
For best dishwashing results follow guidelines on the
following pages to determine the best arrangement for
your items.
Important: Do not remove the racks from the
dishwasher drawer when loaded with dishes.
Recommended Drawer
Loading
If you have a two-drawer dishwasher model, each
drawer has its own controls and can run independently
of the other. For a 10 pc. place setting load, a two-
drawer dishwasher model is required. A single drawer
can hold a 5 pc. place setting load.
For a two-drawer 10 pc. place setting load, see
recommended loading images below. For a single
drawer appliance, either loading image may be used.
Upper Drawer
rM!,i 'I,;'
I, ;'; ; . i ,
Lower Drawer
■i
■ 1
Glasses, cups,
stemware, light­
weight plastics,
plates, bowls,
pans, long-
handled utensils etc.
can be loaded in
either rack.
Do not
load glasses over
the tines.
The utility shelf on
the left side of the
rack folds up or down for loading flexibility. Fold it
down to hold long-handled knives, spatulas and
spoons or short items like
cups or juice glasses. Fold
it up for taller items such as
glasses, bowls, plates, etc.
The edge of the utility shelf
is designed to hold
stemware in place.
M - .4
Drawer Loading Options
A variety of items
such as dinner plates,
mixing bowls, pots,
pans and baking
dishes can be loaded
in the rack.
i'fi,
liSiii;
4»
Five glasses
loaded under
the utility shelf.
, 'il.
A"" .■ ■: ;)V
ft«
'ilk
r4\
|!:j m
AHAM-TO pc. place setting
Cont.