Operating instructions, To adjust fan speeds: you will see, To use auto fan feature – FRIGIDAIRE Air Conditioner User Manual

Page 5: To operate on fan only: you will see

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Operating Instructions

TO CHANGE TEMPERATURE SETTING:

YOU WILL SEE;

Note: Tap or hold either up ( A ) or down (

) button until the desired temperature is seen on the display. This temperature will

be automatically maintained anywhere between 60 °F (16 °C) and 90 °F (32 °C) for cooling mode. The temperature will be auto
matically maintained anywhere between 55 °F (13 °C) and 80 °F (27 °C) for heating mode. If you want the display to read the

actual room temperature. See "To Operate on Fan Only" section on this page.

ADJUST

FAN SPEEDS:

YOU WILL SEE;

TO USE AUTO FAN FEATURE:

Note: Fan starts at High Speed and adjusts to a slower speed as the room temperature dictates. For example, if the room doesn't

get too warm, it will stay at the slowest speed. If the room temperature rises quickly, such as a door being opened, it will auto

matically go to the highest speed. The fan speeds will re-adjust back to the slowest speed as the room returns to the original set

temperature. Press either the fan slower or fan faster button to adjust the fan speed manually. This function is deactivated in the

heating mode on 115V models.

TO OPERATE ON FAN ONLY:

YOU WILL SEE;

Note: Use this function only when cooling is not desired, such as for room air circulation or to exhaust stale air on some models.
(Remember to open the vent during this function, but keep it closed during cooling for maximum cooling efficiency.) You can

choose any fan speed you prefer. (Except "Auto Fan").

During this function, the display will show the actual room temperature, not the set temperature as in the cooling mode. Fan Only

cannot be selected when the unit is in the "Remote Sensing" mode, (on those units with that feature).