Kenmore 625.3847 - Manual (Page 17)

- REPAIR PARTS -
Kenmore Reverse Osmosis Drinking Water System, Model No. 625.384700
Key
No.
Part
Number Description of Part
1 7205350 Faucet
2 7207920 Adaptor, 7/16”-24 x 3/8" Tubing
3 7185788 Screw, #10-12 X 5/8” {8 req.)
4 42-34702 RO Membrane Cartridge
5 7177175 O-ring Seal, 1-7/8" x 2-1/8”
6 7174965 RO Cap
7 7207881 Elbow, 3/8” NPT X 3/8” Tube (2 req.)
8 7156535 Head (2 req.)
9 7170246 O-ring Seal, 3-3/8” x 3-5/8” (2 req.)
10 42-34370 Filter Cart., T & 0 Postfilter
11 7156577 Sump (2 req.)
12 7171674 Connector, 1/8” NPT x 1/4” Tubing
13 7171682 Elbow, 1/8” NPT X 1/4” Tubing
14 7112442 Valve Top
15 7112434 Valve Center
16 7014979 Plunger
17 7099296 Diaphragm (2 req.)
18 7112426 Valve Bottom
19 7030721 Screw, #10-14 X 1-3/4” (4 req.)
■ 7133838 Shutoff Assembly Q]
20 7208502 Tee, 1/4” NPT x 3/8 Tubing
21 7207899 Elbow, 3/8” NPT X 1/4” Tube (2 req.)
22 42-34373 Filter Cart., Sed. - T & O Prefilter
23 7205326 Storage Tank
24 7207938 Adaptor, 1/4" NPT X 3/8” Tubing
25 7208366 Bracket/Membrane Housing
26 7133634 Check Ball
27 7110385 Spring
28 7116763 O-ring Seal, 7/16” x 5/8”
29 7202344 Check Valve Cap
Key
No.
Part
Number Description of Part
30 7095030 Cone Screen
31 7208413 Flow (Control) Insert
32 7227310 Tee, Feed Adaptor
33 7208489 Drain Adapter
34 7209566 Push-in Fitting Kit, 1/4”
7209574 Push-in Fitting Kit, 3/8”
35 9006062 Screw (2 req.)
36 9041700 Hanger Washer (2 req.)
■ 42-34334 Sump Removal Wrench (D
■ 7161823 Tubing, 1/4” X 20’ - white E] @
■ 7161784 Tubing, 1/4” X 100’ - white El @
■ 7157280 Tubing, 3/8” X 20’ - white E @
■ 7161750 Tubing, 3/8" X 100' - white E ®
■ 7227271 Owner’s Manual
Optional Designer Faucets Available:
■ 42-34713 White Faucet
■ 42-34714 Black Faucet
■ 42-34715 Stainless Faucet
Supplemental Storage Tank:
■ 42-34707 Storage Tank, 3.2 gallon
Q] includes key numbers 14 through 19
El tubing lengths for remote installations, page 18 (not
included) Direct replacement for colored lengths of
tubing.
■ not illustrated
0see page 16 for use locations - Note: This o-ring
and collet are for replacement in the bracket/membrane
housing only. They do not fit the other push-in fittings,
key nos. 2, 7, 12, 13, 21 and 24.
@ not inciuded
17