Metric, Dimensions and specifications – Kenmore 625.3847 User Manual

Page 15

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

- DIMENSIONS and SPECIFICATIONS -

15"

STORAGE

TANK

9" dia.

ILJ

16"

Supply water pressure limits.............................................. 40 - 125 psi

Supply water temperature limits........................................ 40 - 100 *F

Maximum total dissolved solids (TDS) ............................ 2000 ppm

Maximum water hardness @ 6.9 pH.................................. 10 gpg

Maximum iron, manganese, hydrogen sulfide................. 0

Chlorine in water supply (max. ppm) ............................... 2.0

Supply water pH limits (pH) ............................................... 4 - 1 0

Product (quality) water, 24 hours (D ................................. 5 gal.

Waste water per gallon of product water ®...................... 5 gal.

Percent rejection of TDS, minimum (new membrane) ®

9 0 - 9 5

Storage tank capacity (max.) ............................................. 2.3 gal.

Automatic shutoff control................................................... yes

Metric

280 - 860 kPa

5 - 40"C

18.9 liters

8.7 liters

Ф feed water supply at 50 psi, 77° F, and 750 TDS - Quality water production, amount of waste

water and percent rejection ail vary with changes in pressure, temperature and total dissolved solids.