Troubleshooting, Troubleshooting -25 – Kenmore REVERSE OSMOSIS 625.38556 User Manual

Page 25

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Troubleshooting

Problem: Water leaking from faucet airgap hole.

Cause:

Drain side of faucet airgap (3/8” black

tubing) plugged, restricted or incorrect

ly connected to drain point.

Correction:

Inspect and eliminate restriction or plug. Refer to installation

instructions for proper drain connection.

See page 9.

Problem: Faucet LED indicator light does not function after battery change.

Cause:

Battery dead.

Correction:

Replace with new battery.

See page 21.

Cause:

Battery installed incorrectly.

Correction:

Install battery correctly.

See pages 13 or 21.

Problem: Water leaks at push connect fittings.

Cause:

Tubing not cut sguare.

Correction:

C_l l._bing sq._.aru.

See page 14.

Cause:

Tubing not pushed in all the way.

Correction:

Push tubing in all the way.

See page 14.

Cause:

Tubing nicked.

Correction:

Remove tube from connection. Remove nicked portion by cutting

tube to shorter length. Re-insert in connection.

See page 14.

Cause:

Outer tubing surface finish not smooth.

Correction:

Remove tube from connection. Remove problem area by cutting

tube to shorter length. Re-insert in connection.

See page 14.

Questions? Call The Kenmore Water Line 1-800-426-9345 or visit KenmoreWater.com