Kenmore 580. 72089 - Manual (Page 4)

ELECTRICAL REQUIREMENTS
OBSERVE ALL LOCAL CODES AND
ORDINANCES.
DO NOT, UNDER ANY CIRCUMSTANCES,
REMOVE THE POWER SUPPLY CORD
GROUND PRONG.
electrical GROUND IS REQUIRED ON
THIS APPLIANCE.
A 115-vott 60 Hz, AC only, 15A fused and
properly grounded electrical supply is required,
A time delay fuse or time delay circuit breaker
is recommended. Use a dedicated circuit,
serving only this appliance,
DO NOT USE AN EXTENSION CORD.
RECOMMENDED GROUNDING METHOD
For your personal safety, this appliance must
be grounded. This appliance has a power
supply
g 3"prong grounding plug. To
minimize possible shock hazard, the cord must
be plugged into a mating grounding type wall
receptacle and grounded in accordance with
the National Electrical Code {ANSI/NFPA 70)
latest edition and all local codes and
ordinances. If a mating wall receptacle is not
available, it is the personal responsibility and
obligation of the customer to have a properly
grounded
3 -prong wall receptacle installed by a
qualified electrician.
AWÄRNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter
Do not use an extension cord.
Failure to follow these instructions can result
in death, fire, or electrica! shock.
■3-prong
grounding
type wall
receptacle
cord
INSTALLING THE POWER CORD
You can choose between two methods below according to your window stool shape and preference.
USING SLIT "A” USING SLIT "B"
Fasten the stopper using 2 screw holes, and lead Fasten the stopper using left screw hole, and rotate
out the power cord through slit "A". properly to lead the power cord out through slit “B"
- ¿ j . ■