Adhere to the following cleaning precautions, General cleaning, To remove heavy soil – Kenmore 790.4139 User Manual
Page 19: To clean the oven bottom, Care and cleaning of stainless steel (some models), Generai care & cleaning, Cleaning the porcelain enamel oven, Cleaning, Care and, Of stainless steel
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Generai Care & Cleaning
Cleaning the Porcelain Enamel Oven
(Manya! clean oven - Lower oven)
Porcelain has a smooth finish and is a type of glass fused to metal. Oven cleaners can be used on porcelain enamel
interior oven surfaces.
REMOVE SPILLOVERS AND HEAVY SOILING AS SOON AS POSSIBLE.
REGULAR CLEANINGS NOW WILL REDUCE THE EXTENT AND DIFFICULTY OF A MAJOR CLEANING LATER.
Adhere to the following cleaning precautions:
• Allow the oven to cool before cleaning.
• Wear rubber gloves when cleaning the appliance manually.
General Cleaning
Remove soils using hot, soapy water. Do not allow food spills with a high sugar or acid content (such as milk, tomatoes,
saukerkraut, fruit juices or pie filling) to remain on the surface as they may cause a dull spot even after cleaning.
To Remove Heavy Soil
1. Allow a dish of ammonia to sit in the oven overnight or for several hours with the oven door closed.
Stand to the side of the oven when opening door to allow ammonia fumes to disperse. Clean softened
spots using hot, soapy water. Rinse well with water and a clean cloth.
2. If soil remains, use a soap-filled scouring pad or a nonabrasive cleaner. If necessary, use an oven cleaner following
manufacturer's instructions.
I DO NOT
mix ammonia with other cleaners.
A CAUTION
Adhere to the following precautions when using oven cleaners:
1. DO NOT
spray on the electrical controls or switches because it could cause a short circuit and result in sparking or
fire.
2.
DO NOT
allow a film from the cleaner to build up on the temperature sensor; it could cause the oven to heat improperly.
(The sensor is located in the rear of the oven on the left side) Carefully wipe the sensor clean, being careful not to
move or bend it. A change in its position could affect how the oven bakes.
3.
DO NOT
spray any cleaner on the oven door trim or gasket, handles or any exterior surfaces of the appliance, wood or
painted surfaces. The cleaner can damage these surfaces.
To
Clean
the Oven Bottom
Clean using hot, soapy water, a mild abrasive cleanser, a soap-filled abrasive pad or oven cleaner following
manufacturer's instructions.
;
.
:
r*
''
2
:
ik CAUTION
Ammonia must be rinsed from all surfaces before operating the oven. Provide adequate ventilation.
ik CAUTION
DO NOT
line the oven wails, bottom, racks or any other part of the appliance with aluminum foil. Doing so
will block heat distribution, produce poor baking results and cause permanent damage to the oven interior (aluminum foil
will melt to the interior surface of the oven).
Care and
Cleaning
of Stainless Steel
(some models)
Some models are equipped with stainless steel exterior parts. Special care and cleaning are
required
for maintaining the
appearance of stainless steel parts. Please refer to the table provided at beginning of this
General Care & Cleaning
section.
19