Installing your dehumidifier, Choosing the proper location, Defrost – Kenmore 580.53650 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

INSTALLING YOUR DEHUMIDIFIER
' Install the dehumidffier on a level floor strong
enough to support the unit with a full bucket
of water.
' For best performance, allow at least 12-18
Inches ot air space on all sides of the unit for
good air circulation,
Keep al! outside doors, windows, and other
openings closed when operating the
dehumidifier. Humid outdoor air will add to the
unit's work toad.
» install your dehumidifier in an area where the
temperature wii! not fall below BBT (18K8Ì. At
temperatures below this, the coils can
become covered with frost,
NOTE : If frost occurs, the unit will cycle on
and off. This is normal. Unplug the unit (or turn
the unit off) until the frost melts and the- room
temperature
DEFROST
CONTROL
When the defrost control frost build-up
on the evaporator coil, it will automatlcaliy shut
off the- compressor. The fan will continue to- run
to draw air across the coil and melt the frost.
When the coll is defrosted) the -compressor will
automatically restart and dehumidifying
resume.
CHOOSING THE PROPER LOCATION
Use the dehumidifier in a basement to help-
prevent moisture damage.
Use the dehumidifier in cooking, laundry,
bathing, and dishwashing areas that have
excessive moisture.
' Use the dehumidifier to prevent moisture
damage anywhere books or valuables are
stored.