Kenmore 911.41789 - Manual (Page 20)

LLUÀ
CARE AND CLEANING
Self‘Cleaning Cycle
I
rO$ETACt.£ANPYCLe
The Clean Cycle, including cool down
time, is automatically set for 4 hours,
but you may change this from 3 hours if
oven is lightly soiled, up to 5 hours if
oven Is heavily soiled.
1. Press the CLEAN
pad. 4 hours will
show In the display.
If you want to change
the length of clean
time press the
HOUR MIN UP
and/or DOWN arrow
pad.
Press the START
pad,
HOUR MIN
TO STOP A OLPAN CYCLP
Simply press the CLEAR/OFF pad.
You will need to wait for the oven
temperature to drop below the lock
temperature (approx. 1 hour) before
attempting to open the door.
APTPP WE cycle
After the cycle, you may notice some
white ash in the oven, Just wipe it up
with a damp cloth or sponge.
If white spots remain, scrub them with a
soap-filled steel woo! pad, Be sure to
rinse thoroughly. These are usually
deposits of salt that cannot be removed
during the cycle.
If for any reason you are not
satisfied with the cleaning
results, just repeat the cycle.
TO SET A
DELAYEO START CYCLE
CLEAN
®®
HOUR MIN
DELAY
START
TIME ,
HOUR MIN
(STAR-^
1. Press the CLEAN
pad.
2
.
If you want to
change the length
of clean time press
the
HOUR/MIN
UP and/or DOWN
arrow pads,
3. Press the DELAY
START TIME
pad.
4. Press the
HOUR/MIN UP
and/or DOWN
arrow pads to set
the time you prefer
the clean cycle to
start.
5. Press the START
pad.
20