Operawh, Setting special features, Convection cpnvension – Kenmore 911.41789 User Manual
Page 18: Cook and nolo, Changing the speed of the up oft down aftrow pads
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
OPERAWH
Setting Special Features
Your control will allow you to lock the
touch pads so they cannot be activated
when pressed. If you're worried about
leaving the oven unsupervised, activate
this feature.
1.
Press and hold,
at the same
time,
the
BAKE
and
BROIL
pads
for 3 seconds, until the display
shows
SF.
2. (a)
Press the
CLEAN
pad. The
display shows
LOG OFF
(lockout
off).
(b)
Press the
CLEAN
pad
again.
The display wilt show
LOC ON
(lockout on).
3.
Press the
START
pad.
This feature can only be set
when the oven is not in use.
When this feature is on, the display will
show
LOC,
if a touch pad is pressed.
(This feature will not affect the clock,
timer, or oven light pads.)
CONVECTION CPNVENSION
This feature will automatically convert
the temperature you set for traditional
baking to convection cooking.
1.
Press and hold the
CONVECTION
BAKE
pad for 4 to 5 seconds.
2.
Press the
TEMP UP
or
DOWN
ARROW
pads to set the
temperature.
3.
Press the
START
pad. You will see
the converted temperature in the
display. For example, if you entered
375° the display will show 350°. This
conversion will need to be set each
time you use Convection Bake.
COOK AND NOLO
Your new control has a cook and hold
feature for timed cooking only that will
keep hot cooked foods warm up to 3
hours after the timed cooking is
finished. To activate this feature:
1.
Press and hold,
at the same
time,
the
BAKE
and
BROIL
pads
for 3 seconds, until the display
shows
SF,
2. (a)
Press the
OVEN COOKING
TIME
pad. The display will show
HLd OFF.
(b)
Press the
OVEN COOKING
TIME
pad
again
to activate the
feature. The display will show
HLd
ON
3.
Press the
START
pad.
CHANGING
THE SPEED OF THE
UP Oft DOWN AftROW PADS
This special feature will allow you to
change the speed; #1 means speed of
change is slow up to #5 which means
speed of change is fast. To set the
speed you prefer, follow these steps:
1.
Press and hold,
at the same
time,
the
BAKE
and
BROIL
pads
for 3 seconds, until the display
shows
SF,
2.
Press the
UP
arrow pad. The
display will show the current set
speed.
3.
Press the
UP
arrow to increase the
speed up to the number 5,
or
Press the
DOWN
arrow pad to
decrease the speed down to the
number 1.
4.
Press the
START
pad.
18