Kenmore 565.68301 - Manual (Page 9)

Turntable Installation
• Place the roller rest on the cavity
bottom.
• Turntable hub should securely
locked in the receptacle. Never
place the turntable upside down.
• The turntable rotation should never
be restricted.
• Place the turntable on top of the
roller rest as shown in the diagram.
• Both turntable and roller rest must
always be used during cooking.
• Ail food and containers of food are
always placed on this turntable for
cooking.
• This turntable rotates clockwise or
counterclockwise; this is normal.
INSTALLATION
Turntable Hub(undersicle)
Remove all packing material and accessories.
Examine the oven for any damage such as dents or broken door.
Do not install if oven is damaged.
1. Select a level surface that provides enough open space for the intake and/or
outlet vents.
A minimum clearance of 3 inches (7.5 cm) is required between the oven and
any adjacent wall. One side must be open.
• Leave a minimum clearance of 3 inches (7.5 cm) above the oven.
• Do not remove the legs from the bottom of the oven.
• Blocking the intake and/or outlet openings can damage the oven.
• Do not install oven over a range, cooktop or other heat-producing
appliance.
2. Plug your oven into a standard 120-volt / 60-Hz household outlet.
Be sure the electrical circuit is at least 15 amperes and that your microwave
oven is the only appliance on the circuit.
NOTErThis unit is not designed for 50 Hz or any circuit other than a 120-volt/60-Hz
ACTfifcuit. This oven is designed for countertop installation only. Insertion into a
cabinet or wall will damage the product and void the warranty.