Kenmore Air Conditioner - Manual (Page 6)

Air Conditiorier Features
(continued)
TO USE AUTO COOL FEATURE; YOU WILL SEE;
LIGHT On
Note: Fan speed starts at high and adjusts to a
slower speed as the room temperature dictates. For
example, if the room doesn't get too warm it will stay at the
slowest speed. If the room temperature rises quickly, such
as a door being opened, it will automatically go to the
highest speed. The fan speeds will readjust back to the
slowest speed as the room returns to the original set
temperature. Press either the Fan Slower or Fan Faster button to
adjust the fan speed manually.
TO OPERATE ON FAN ONLY; YOU WILL SEE;
LIGHT On
Note: Use this function only when cooling is not desired,
such as for room air circulation or to exhaust stale air.
You can choose any fan speed you prefer.
During this function, the display will show the actual room
temperature, not the set temperature as in the cooling
mode.
TO USE THE
POWER SAVER FEATURE:
DO THIS:
PRESS
MODE BUTTON
CHOOSE
POWER SAVER
YOU WILL SEE:
LIGHT On
Note: In this mode, the fan will continue to run for 3
minutes after the compressor shuts off. The fan then cycles
on for 2 minutes at 10 minute intervals until the room
temperature is above the set temperature, at which time
the unit turns back on.