To change, Temperature setting, To adjust fan speeds – Kenmore Air Conditioner User Manual

Page 5: Air cofnclitioner features, Do this

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Air Cofnclitioner Features

(continued)

TO TURN UNIT ON;

NOTE:

The

following

instruction

represent

the

Touch

Pad,

the

same instructions can be used for the Remote Control.

YOU WILL SEE;

I nr*' ^ ^

. 'It?

■'ii

DO THIS:

-PRESS ON/OEE

PAD

i'ftiiBÉej

{Sfeep;

. 7

TO CHANGE
TEMPERATURE SETTING:

YOU WILL SEE:

Note: Tap or hold either

up(A)

or down(v) button until the

desired

temperature

seen

the

display.

This

temperature

will

automatically

maintained

anywhere

between 60E (16C) and 90E (32C). If you want the display

to read the actual room temperature. See " To Operate on

Fan Only " section on Page 6.

TO ADJUST FAN SPEEDS:

YOU WILL SEE;

A 2 Digit Display is used to indicate the Fan Speed setting,
from 10 through 99. When the " SLOWER" button is

pressed the motor speed will slow down at various

intervals, to a minimum setting of 10. To speed the motor

up, press the" FASTER" button. The speed will increase at

various intervals to a maximum setting of 99.