beautypg.com

The dispenser lock (on some models), Dispenser, Notes – Kenmore WI0151336A User Manual

Page 12: Non-indicator water fitter (on some models), Changing the water filter

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

The Dispenser Lock (on some models)

The dispenser can be locked for easy cleaning or to avoid

unintentional dispensing by small children and pets.

NOTE:

The lock feature does not shut off power fo the

refrigerator, to the ice maker, or to the dispenser light. It simply

deactivates the dispenser levers.

To turn off the dispenser, press the LOCK button. The indicator

will appear above the LOCK button and the ice and water

dispensers will not work. To unlock the dispenser, press the

UNLOCK button until the indicator appears. Then continue to

dispense ice or water as usual.

DISPENSER

LOCK UNLOCK

NOTES:

Avoid twisting the cap when removing the filter because
this could cause the cap to come off. If this occurs,

replace the cap and pull the filter straight out.

There will be water in the filter. Some spilling may occur.

The water filter status light will help you know when to change

your water filter. When the status light changes from green to

yellow, this tells you that it is almost time to change the water

filter. It is recommended that you replace the filter when the

status light changes to red OR when water flow to your water

dispenser or ice maker decreases noticeably. The filter should be

replaced at least every 6 months depending on your water quality

and usage. To change the filter, see “Changing the Water Filter.”

A, Status light

B. Light switch

After changing the water filter cartridge, reset the status light by

pressing the light switch 5 times within 10 seconds. The light will

change from red to green when the system is reset.

Non-Indicator Water Fitter (on some models)

If your refrigerator does not have the water filter status light, you

should change the water filter cartridge at least every 6 months

depending on your water quality and usage. If the water flow to

the water dispenser or ice maker decreases noticeably before

6 months have passed, replace the water filter cartridge more

often.

Do not use with water that is microbiologically unsafe or

of unknown quality without adequate disinfection before

or after the system. Systems certified for cyst reduction

may be used on disinfected waters that may contain

filterable cysts.

Changing the Water Filter

The water filter is located in the base grille below the freezer

compartment door. It is not necessary to remove the base grille

to remove the filter.

1.

Remove the filter by pressing the eject button and pulling

straight out on the filter cap.

A. Eject button

B, Fitter cap

2.

Remove the cap by turning it counterclockwise until it stops.

IMPORTANT:

Do not discard the cap. It is part of your

refrigerafor. Keep the cap to use with the replacement filter.

3.

Take the new cartridge out of its packaging and remove the

protective cover from 0-rings.

B. O-rings

4.

Place the cap (removed in Step 2) on the new filter. Align the

ridge on the cap with the arrow on the filter. Turn the cap

clockwise until it snaps into place.

B. Arrow on filter
C. Ridge on cap

12