Kenmore ELITE 790.488 - Manual (Page 34)

User Preferences
SETTING CLOCK
See the example below to set the clock to 1:30.
©■
1. Press I
2. Enter 1:30 to advance to 1:30.
3. Press START to accept or press STOP to reject.
SETTING 12 OR 24 HOUR MODE
The clock display mode allows you to choose between 12
and 24 hour mode. The factory preset clock display mode is
12 hour.
See the example below to change the default mode to 24
hour.
1. Press and hold ^ seconds until CLOCK 12Hr or
24Hr appear in the display.
2. Press FLEX CLEAN to switch between the 12 and 24
hour mode.
3. Press START to accept or press STOP to reject.
ADJUSTING OVEN TEMPERATURE
User preference offset
Your appliance has been factory calibrated and tested to
ensure an accurate baking temperature. For the first few uses,
follow your recipe times and temperature recommendations
carefully.
If you feel your oven is too hot or too cool from your baking
experience, the oven temperature may be adjusted to your
liking. The temperature may be increased up to +35°F (+19°Cj
or decreased down to -35°F {-19°Cj from normal.
See the example below to increase the temperature in the lower
oven.
1. Press and hold BAKE for 7 seconds until USER appear
in the display.
2. Enter the desired temperature change using the number
pads. FLEX CLEAN can be pressed to lower the
temperature.
3. Press START to accept or press STOP to reject.
CHANGING BETWEEN F° OR C°
Your control has the ability to display and set Fahrenheit or
Celsius temperatures. The factory preset temperature display
is Fahrenheit.
See the example below to change the default temperature
display to Celsius.
1. Press and hold BROIL for 7 seconds until F or C appear
in the display.
2. Press FLEX CLEAN to switch between the F and C
mode.
3. Press START to accept or press STOP to reject.
SETTING AUDIO MODE
The audio mode allows you to control the audio for the
oven control. You may turn the audio
off and later return to
operating with all the normal audible sounds and alerts.
See the example below when changing the audible settings.
1. Press and hold DELAY START for 7 seconds until AUDIO
appears in the display.
2. Press FLEX CLEAN to switch between the On and Off
mode.
3. Press START to accept or press STOP to reject.
SETTING 12HR ENERGY SAVING MODE
The oven control has a factory preset built-in 12 hour energy
saving feature that will shut off the appliance if the oven
has been heating for more than 11 hours and
59 minutes.
The oven can be programmed to override this feature for
continuous baking.
See the example below to turn off 12 hour energy saving
mode.
1. Press and hold TIMER for 7 seconds until En-SAVER
appears in the display.
2. Press FLEX CLEAN to switch between the On and Off
mode.
3. Press START to accept or press STOP to reject.
34