Pan position for one rack baking, Lower oven operating instructions – Kenmore ELITE 790.488 User Manual
Page 27
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Convection Bake uses two fans to circulate the oven heat
evenly and continuously. The improved heat distribution
allows for even cooking with excellent results. Multiple rack
cooking may slightly increase cook times for some foods,
but the overall result is time saved.
The Conv Bake feature should ONLY be used when your
recipe instructions have been written for use with convection
baking.
If your recipe instructions are for normal baking and
you wish to use convection bake, follow the Convection
Convert option instructions. The convection convert option
will automatically adjust the oven temperature so that
convection baking may provide the best possible results.
Conv Bake may be set with the following options:
• Conv Convert
• Cook Time and/or Delay Start
Benefits
of
convection bake:
• Superior multiple oven rack performance.
• Some foods cook up 25 to 30% faster, saving time and
energy.
• No special pans or bakeware required.
For best results
• When baking with a single rack use rack positions 2 or 3.
When using 2 racks use rack positions 2 &
4.
When using
3 racks use rack positions 1, 3 (offset rack) & 4.
• Cookies and biscuits should be baked on pans with no
sides or very low side to allow heated air to circulate
around the food.
• Food baked on pans with
a
dark finish will cook faster.
• When placing multiple food items in the oven allow 2-4”
(5-lOcmj of space between the food items for proper air
circulation.
Lower Oven Operating instructions
(continued)
CONVECTION BAKE
The following temperature settings apply to the conv bake
feature:
• Auto-suggest (default) setting: 350°F / 177°C
• Min. bake setting : 170°F / 76°C
• Max. bake setting: 550°F / 288°C
See the example below to set conv bake, starting
immediately with the auto-suggest (default) setting of 350°F
(177°C):
1. Press CONV BAKE
2. Press START
After the oven reaches set temperature, a beep will indicate
the oven is ready. The oven will continue to maintain this
temperature until the cooking feature is canceled.
NOTE
You may press STOP any time when setting the control or
during the cooking process.
I
Convection air flow
Model with dual fan
shown only
Pan position for one rack baking.
(27” & 30” models)
(27” Models)
(30” Models)
27