Kenmore 88762 - Manual (Page 13)

HI-POWER” COOKING
1. Touch CLEAR, and a beep tone will be heard. The 1. Touch CLEAR.
CLEAR erases all previous settings.
2. Touch TIME.
2. Touch TIME. The lights above TIME and below
COOK 1 will go on. (“0” will show in the display
window.)
3. Touch the correct numbers on the control panel to set
the cooking time. The time set will show in the display
window at the top of the control panel. For example:
• To set 30 seconds, you would touch “3” and then
“ 0 .”
• To set 3 minutes, touch “3,” “0” and “0.”
• To set 3% minutes, touch “3,” “3” and “0.”
Remember, the timer is a digital clock that is divided
into 60 seconds. Therefore, 1/2 minute is equal to 30
seconds. Touch 30 and not 50 as with a calculator to
indicate 1/2.
NOTE: It is not necessary to touch POWER CONTROL
when cooking with the highest power (“HI”). However, if
POWER CONTROL is touched, the light above POWER
will go on and the word “HI” will show in the display
window. This is to let you know that the oven will be
operating on “HI” power unless a different power setting
is chosen.
4. Touch START. The oven will begin cooking, and the
display window will show the time counting down in
seconds. A tone will sound and the word “End” will
show in the display window for two seconds when the
cooking time is completed. Then the oven will shut
itself off.
NOTE: To stir food during cooking; open the oven
door; stir or turn the food; close the oven door; and
touch START. The oven will automatically continue to
count down the amount of time left on the timer.
EXAMPLE: Fresh fish can be cooked quickly on “HI”
(maximum power) for 6 minutes. To do this, follow these
4 simple steps:
3. Set 6 minutes by touching
“6,” “0” and “0.” “600”
will show in the display
window.
4. T ouch ST ART. The oven
will begin to cook and the
time will begin to count
down in the display
window for 6 minutes. A
tone will sound and the
word “End” will show in
the display window for 2
seconds. Then the oven
will shut itself off.
13