Kenmore ELITE 790.99613 - Manual (Page 18)

Setting Oven Controls
Consumer Defined Control Features
Setting Temperature Display — Fahrenheit or Celsius
The BROIL and FLEX CLEAN pads control the Fahrenheit or Celsius temperature display modes. The
oven control can be programmed to display temperatures in Fahrenheit or Celsius. The oven has been preset at the
factory to display in Fahrenheit.
INSTRUCTiONS
To change dispiay from Fahrenheit to Ceisius or
Ceisius to Fahrenheit
□ D C C C
1
.
2 .
3.
To tell if the display is set for Fahrenheit or Celsius press
(Figure 1) and hold for 7 seconds; "550°" will appear and
"BROIL" will flash in the display and a beep will sound. If "F"
appears, the display is set to show temperatures in Fahrenheit
(Figure 2). If "C" appears, the display is set to show
temperatures in Celsius (Figure 3).
Pfsss to switch between Fahrenheit or Celsius display
modes. The display will show either "F" (Figure 2) or "C"
(Figure 3).
Press to accept the change or press to reject the
change.
»
for/seconds
DISPLAY
l O n c c n
I- JU □ Du
Figure 1
Figure 2
or Figure 3
18