Kenmore ULTRASOFT 250 625.38826 - Manual (Page 6)

jj jj jjj jj
J ja JJ J J JJ J J JJ J J J SECTION 1
j jj j^j jj jj^^sijj jjja
WATER SOFTENER START UP
C. PROGRAM THE TIMER
FIG. 2
signal light adjust salt level adjust display
UP button SELECT button
№CHARQE
TONIGHT
RECHARCe
NOW
Customer Assistance
1
-
300
-
426-9345
WWW. Ksfimore Wa ter coni
©
LOW
SALT
©
ON/OFF-HOLD button
(Recharge Tonight-Now)
When the transformer is plugged in, a model code,
and a test number (example: k20) show in the face
plate display for 4 seconds. Then, 11:00 AM and
PRESENT TIME begin to flash.
UltraSoft 250
Brin
t
/c-uu
PRESENT TIME
UltraSoft 275
Sr 33
l-iO
1
IC'UU
PRESENT TIME
Notes:
If SR - - shows in the display, press the UPQ or-
DOWNQ button until SR29 shows for the Ultra-
Soft 250 or SR33 shows for the UltraSoft 275. Then,
press the SELECT button to set, and change to the
flashing PRESENT TIME display.
To check the model code, unplug the transformer at
the wall outlet and plug in again, if other than these
codes show, see page 5-3 to reset.
SOUND "BEEPER": A "beeper" sounds while
pressing buttons for timer set-up. One beep signals
DOWN button
a change in the face plate display. Repeated beeps
mean the timer will not accept a change from the
button you have pressed, telling you to use another
button. For example, while setting the hardness
(step 2), the beeper sounds repeatedly when the dis­
play reaches 1 using the DOWN button, or the high­
est hardness setting using the UP button.
SET PRESENT TIME OF DAY
If the words PRESENT TIME do not show in the dis­
play, press the SELECT button (FIG. 2) until they do,
or see the previous notes.
■ Press the UP / DOWN buttons to set the present
time. Press UP to move the display ahead; press
DOWN to move the time backward.
If the present time is between
noon and midnight, be sure
PM
shows.
If the present time is between
midnight and noon, be sure AM
shows.
Each press of the UP /DOWN buttons changes
the time by 1 minute, Flolding the buttons in
changes the time 32 minutes each second.
1 - 3
Problems, Questions? Call 1-800-426-9345 Kenmore Water Line