Flow rate (gpm), Pressure drop (psi) vs. flow rate (gpm), Know about your water softener – Kenmore ULTRASOFT 250 625.38826 User Manual
Page 21: A. dimensions/specifications
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
JJ
I SECTION 4
..rj J^,JJJ JU-JU JJ
jjjjjjjjjjjjj
KNOW ABOUT YOUR WATER SOFTENER
A. DIMENSIONS/SPECIFICATIONS
Pressure Drop (PSI) vs. Flow Rate (GPM)
Flow Rate (GPM)
OTHER SPECIFICATIONS
UltraSoft 250
UltraSoft 275
Type of ion exchange material (resin) —............. high capacity
Amount of resin (cu ft)------------- ---------------------- 0.96
Total regeneration lime ®--.................................... approximately 124
minutes @ 5,8 salt
dose
Efficiency Rating -......... —................... -................ 5060 @ 2.9 lb salt
Max. Drain Flow Rate (gpm)-------------- -------------- 1.8
high capacity
1.07
approximately 124
minutes @ 6.4 salt
dose
5060 @ 3.2 lb salt
2.0
gpm = gallons per minute gpg = grains per gallon
psi = pounds per square inch ppm = parts per million
® Does not include CLEAN feature cycle times if set to ON.
These systems conform to NSF/ANSI 44 for the specific performance claims as verified and substantiated by test data.
The efficiency rating is only valid at the stated salt dosage. These softeners were efficiency rated according to NSF/ANSI
Standard 44.
4 - 2
Problems, Questions? Call 1-800-426-9345 Kenmore Water Line