Timed dry cycle, Automatic perm press cycle, Automatic regular cycle – FRIGIDAIRE FSEC/FSGC747GE User Manual
Page 2: Cycle selection, Energy saving tips
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

DRY TEMPERATURE
PERM
PRESS
MEDIUM HEAT
KNITS/DEUCATES
LOW HEAT
CYCLE SIGNAL
QUIET
2 - WAYTUMBLE ACTION DRYING
LOUD
TURN TO START
ON
AUTOMATIC
|„c
I I A P
LESS
DOWN
REGULAR
dry
MORE
DRY
PRESS SAVER
AUTOMATIC
PERM PRESS
TIMED
DRY
START
Cycle Selection
Turn cycle selector clockwise to desired cycle and setting.
Each cycle ends with a cool down period. The heat
automaticallyturns offand the load continues to tumble
for 5-10 minutes. This reduces wrinkling and makes
items easier to handle during unloading.
Drying time varies depending on load size, dampness of
load and
fabric type. Room temperature and humidity,
type of installation and electrical voltage or gas pressure
can also affect drying time.
Timed Dry Cycle
This cycle provides up to 70 minutes of drying time at
the temperature selection of your choice.
Automatic Perm Press Cycle
This cycle is best for permanent press, knit and delicate
items. Drying time is determined automatically at the
temperature selection of your choice.
• Medium heat is suggested for permanent press items.
• Low heat is suggested for knit and delicate items.
• If the dried load cannot be removed promptly, the
cycle selector will advance to the
PRESS SAVER
setting.
• Unheated tumbling continues during
PRESS SAVER
for 40 minutes to help reduce wrinkling.
• When the Cycle Signal is on, it will sound briefly every
5 minutes as a reminder to remove the load.
Automatic Regular Cycle
This cycle is best for cotton items that can be tumble
dried.
Drying
time
is
determined
automatically
at
the
temperature selection of your choice. This cycle is best
for items of similar fabric, weight and construction.
• For items requiring more drying time, set cycle selector
on
MORE DRY.
• For items requiring less drying time, set cycle selector
on
LESS DRY.
Energy Saving Tips
•
Keep the lint screen clean and exhaust the dryer
correctly.
• Sort laundry properly and select proper temperature
and cycle settings. Choose an automatic dry cycle
whenever possible for accurate drying time.
•
Dry only full loads. Single items and small loads
usually take longer to dry.
• Avoid overloading, adding wet items to a partially
dry load, and overdrying.
• Dry one load after another to take advantage of a
warm dryer.
•
Opening the door needlessly causes warm air to
escape, which prolongs drying time.
• If possible, use the dryer on low humidity days.
•
Install the dryer in an area where the room
temperature is at least 45°F (7°C).
P/N 131633100 (9609)