Kenmore GENIUS II 625.34867 - Manual (Page 20)

SECTION 4
OTHER THINGS TO KNOW
4A. DIMENSIONS/SPECIFICATIONS
FIG. 12 BYPASS VALVES
MODEL NO. 625.348670 TIMER HF CODE HF32
NOTE: Please see the rating decal for water softener operating capacity, salt usage and service flow rate/pressure
loss performance specifications. Performance specifications are validated by the Water Quality Association
(WQA). The rating decal is located on the rim, under the salt hole cover (see page 30).
WATER SUPPLY TO WATER SOFTENER
MINIMUM WATER SYSTEM FLOW (gpm)............................3
MINIMUM-MAXIMUM WATER PRESSURE (psi) ........20-120
MAXIMUM WATER TEMPERATURE (“F)......................... 120
MAXIMUM WATER HARDNESS (gpg) ............................ 110
MAXMUM “CLEAR WATER” IRON (ppm)............................8
SALT FOR WATER SOFTENER
TYPE OF SALT NEEDED ................................ Nugget/Pellet
ALTERNATE TYPE OF SALT .. Pure, evaporated, compacted
water softener salt
STORAGE CAPACITY (pounds)....................................... 200
OTHERS
TYPE OF ION EXCHANGE MATERIAL (resin) High Capacity
AMOUNT OF RESIN (cu.ft.) ............................................. 1.0
REGENERATION (RECHARGE) CYCLE TIME (min.)
FILL (NaCL setting) ..............................................2.7-10.6
FILL (KCI setting)................................................ 3.8-12.6
BRINING / BR. RINSE ...........................................120-135
BACKWASH...................................................................... 7
FAST RINSE...................................................................... 3
TOTAL REGENERATION TIME...................... 139.4-164.4
gpm = gallons per minute psi = pounds per square inch
gpg = grains per gallon
ppm = parts per million
20