Self-cleaning (cont’d), Starting the select self-clean cycle, To set the controls for a self-clean cycle – Kenmore 790.9411 User Manual
Page 15: When the self-clean cycle is complete, Self-cleaning, Cont’d)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Self-Cleaning
(cont’d)
Starting the Select Self-Clean Cycle
For satisfactory results, use a 2 hour Self-Clean cycle for
light soils
and a 3 hour cycle for
average
or a 4 hour cycle for
heavy soils. NOTE:
The kitchen area should be well ventilated using an open window, ventitlation fan or exhaust hood
during the 1 st Self-Clean cycle. This will help eliminate the normal odors associated with the 1 st Self-Clean cycle.
To Set the Controls
for a Self-Clean Cycle:
1. Be sure the clock shows the correct time of day.
2. Press "--------------- " appears in the display.
3. Press the or 'V once. "3:00" appears in the display for a 3 hour cycle. To change to a 2 hour cycle press 'V .
"2:00" appears in the display or to select a 4 hour cycle press . "4:00" appears in the display.
As soon as the controls are set, the motor driven lock will begin to close automatically and the “LOCK” indicator light
will flash.
DO NOT
open the oven door while the light is flashing (it takes about
1
5 seconds for the oven door to lock).
4.
"CLn"
will appear in the display during the Seif-Clean cycle and the "LOCK" light will glow until the Self-Cleaning cycle
is complete or cancelled and the oven temperature has cooled.
When the Self-Clean Cycle is complete:
1
. The time of day or
"End"
will appear in the display window and the “Clean” and "LOCK" light will continue to glow.
2
.
Once the oven has cooled down for about
1
HOUR and the "LOCK" light has gone out, the oven door can be opened.
3. If
“End”
is in the display and the Select Clean indicator light remains ON, press (s). The time of day will appear in the
display.
NOTE:
When the oven is cool, wipe away any residue or powdered ash with a damp cloth or paper towel.
Stopping or Interrupting a Select Self-Cleaning Cycle
If it becomes necessary to stop or interrupt a Self-Cleaning cycle:
1
.
Press (Sy.
2. Once the oven has cooled down for about 1 HOUR and the "LOCK" light has gone out, the oven door can be opened.
3. Restart the Self-Clean cycle once all conditions have been corrected.
iàCAUTION
I
To avoid possible burnsuse care when opening the oven doorafterthe Self-Cleaning cycle. Stand to the side of
the oven when opening the door to allow hot airor steam to escape.
A
caution
I
DO NOT
force the oven dooropen. This can damage the automatic doorlocking system. Use caution and avoid
possible burns when opening the door after the Self-Cleaning cycle has completed. The oven may still be VERY HOT.
15