Looking/imme – Kenmore 25374184403 User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
fi
^CAUTION
'Looking/ImMe:
_________ To avoid .personalJnjury.pr.property damage, handle,:
'.tempered-glass 'Shelves..carefully.'Shelves, may.-brea.lc sud.denly.1f ■
nicked, scratched, or exposed to sudden temperature..change. ......
SHELF ADJUSTMENT
Refrigerator shelves are easily adjusted to suit individual needs. Before
adjusting the shelves, remove all food.
To adjust sliding shelves:
® Remove shelf by pulling forward to stop position.
^ Lift front edge up and pull out.
Replace the shelf on any pair of rails by reversing this procedure.
To adjust cantilever shelves:
:-NOTE:..Cantilev.ershe!yes.are.supported at-the back of .the refrigerator.
Cantilever shelves are available in either-glass or-wire."''..............................
Lift front edge up.
® Pull shelf out.
Replace the shelf by inserting the hooks at rear of the shelf into the wall
bracket. Lower the shelf into the desired slots and lock into position.
SpillProof^glass
shelves (some models) catch and hold accidental spills. In
some models, the Sp/7/Proof’" shelves slide out for easy access to food and
for fast cleaning. The shelves slide out independently of the cantilever
brackets. Just pull the front of the shelf forward. The shelf can be extended
as far as the stopper will allow but it is not removable from the cantilever
bracket.
Sliding Wire Shelf
Full Width Cantilever Glass Shelf
Cantilever Glass Shelf - Fixed and Sliding
12