Troubleshooting – Kenmore 625.38556 User Manual

Page 25

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Troubleshooting

Problem: Water leaking from faucet airgap hole.

Cause: Drain side of faucet airgap (3/8” black

tubing) plugged, restricted or incorrect

ly connected to drain point.

Correction: Inspect and eliminate restriction or plug. Refer to installation

instructions for proper drain connection. See page 9.

Problem: Faucet LED indicator light does not function after battery change.

Cause: Battery dead.

Correction: Replace with new battery. See page 21.

Cause: Battery installed incorrectly.

Correction: Install battery correctly. See pages 13 or 21.

Problem: Water leaks at push connect fittings.

Cause: Tubing not cut sguare.

Correction: C_l l._bing sq._.aru. See page 14.

Cause: Tubing not pushed in all the way.

Correction: Push tubing in all the way. See page 14.

Cause: Tubing nicked.

Correction: Remove tube from connection. Remove nicked portion by cutting

tube to shorter length. Re-insert in connection. See page 14.

Cause: Outer tubing surface finish not smooth.

Correction: Remove tube from connection. Remove problem area by cutting

tube to shorter length. Re-insert in connection. See page 14.

Questions? Call The Kenmore Water Line 1-800-426-9345 or visit KenmoreWater.com