beautypg.com

Maintenance, Maintenance -21 – Kenmore 625.38556 User Manual

Page 20

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

Maintenance

PREFILTER/POSTFILTER MAINTENANCE

NOTE:

It is recommended to replace the battery, prefilter

and postfilter cartridges at least every 6 months of prod­

uct water use. Replace more often if they begin to plug

with sediments.

The prefilter and postfilter are replaceable sediment car­

tridges with activated carbon in its composition. See

Figure 25. You must periodically replace the prefilter and

postfilter cartridge. This will protect the RO membrane

from being destroyed by chlorine. It will also prevent the

filters from plugging with sediments.

You may notice a slower output of product water as the

prefilter and postfilter build up with sediments. Replace

the prefilter and postfilter cartridges when this occurs. You

should replace the battery whenever you replace the car­

tridges.

RO MEMBRANE CARTRIDGE MAINTENANCE

The Reverse Osmosis cartridge is a tightly wound special

membrane. See Figure 25. The membrane reduces the

dissolved solids and organic matter. The life of the

Reverse Osmosis membrane cartridge depends mostly on

the pH and hardness of the supply water, (see specifica­

tions). Cartridge life is shorter with higher pH. For exam­

ple, if supply water pH is from 6.8 to 77, the cartridge

may last for well over one year. However, cartridge life

may be as short as 6 months if the pH is as high as 8.5 to

10. Higher pH weakens the cartridge membrane and

causes pin-hole leaks. It's time to replace the Reverse

Osmosis cartridge when the production rate and/or quali­

ty of product water drops. Product water may begin to

taste different or bad, indicating solids and organics are

passing through the Reverse Osmosis membrane. See

Reverse Osmosis cartridge replacement.

REVERSE OSOMOSIS CARTRIDGE REPLACEMENT

Complete the following steps to replace the cartridges.

1. If possible,turn off the water supply to the RO system.

2. Remove (turn to the left) the pre filter cartridge from

the filter head to relieve pressure on the Reverse

Osmosis cartridge.

3. Remove the Reverse Osmosis cartridge.

4. Remove the postfilter cartridge.

5. Discard the cartridges in a proper manner.

6. Install new cartridges in reverse order (postfilter.

Reverse Osmosis and then prefilter). Turn cartridges to

the right to re-attach to the filter heads.

7 Remove and replace the timer battery. See Figure 29.

8. Turn on the water supply to the RO system.

9. Purge the Reverse Osmosis membrane cartridge. See

page 17 for instructions.

Cover

Turn to the left

to remove

,‘f^

‘y[p

Postfilter

Cartridge

RO

Cartridge

Prefilter

Cartridge

Figure 25

PREFILTER/POSTFILTER CARTRIDGE REPLACEMENT

Complete the following steps to replace the cartridges.

1. If possible,turn off the water supply to the RO system.

2. Remove the pre filter cartridge (turn to the left) from

the filter head. Then remove the post filter cartridge.

3. Discard the cartridges in a proper manner.

4. Install new cartridges in reverse order (postfilter first,

then pre filter). Turn cartridges to the right to re-attach

to the filter heads.

5. Remove and replace the timer battery. See Figure 29.

6. Turn on the water supply to the RO system.

7. Purge the Reverse Osmosis membrane cartridge. See

page 17 for instructions.

Questions? Call The Kenmore Water Line 1-800-426-9345 or visit KenmoreWater.com

20