Step 2. location and electrical hook-up, Electrical hook-up – Kenmore 758.15408 User Manual
Page 5
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
step 2. Location and Electrical Hook-Up
WARNING; For your own safety, do
not use humidifier if any parts are
damaged or missing.
Selecting A Location
Place humidifier on a fiat levei surface,
take extra care in leveiing when piacing
the unit on carpet. Position the humidifier
where the most humidity is needed or
where the most air wiil be circuiated
throughout the house such as near a
coid air return.
Moist air (humidity) produced will
disperse into the whoie house, but the
area ciosest to the unit wiii have the
highest humidity, if the unit is positioned
close to a window, condensation may
form on the window pane. If this occurs
the unit should be repositioned in another
location.
NOTE:
Due to release of cool, moist air
from humidifier, it is best to direct air
away from thermostat and hot air
registers and to position humidifier next
to an inside wall. Unit should not be
placed where cold air from outside wails
or warm air from a hot air register blows
directly on it.
Positioning
The
Unit
The humidifier should be positioned with
the back (cord exit side) and left side, at
least 2 inches away from the wall. Air
needs to enter through all of the louvers
in the housing assembly in order for the
humidifier to operate at peak efficiency.
NOTE:
Be sure humidistat (located
approximately 4 inches outside
humidifier body on power cord) is free
from obstruction and away from any hot
air register.
Electrical Hook-Up
—
Locate nearest 120V A.C. wall socket in
the location desired, preferably on inside
wall. With the humidifier in the desired
location, route the electrical cord safely
so no one will trip or upset the humidifier.
Plug in the electrical cord.
If the plug does not fit fully in the outlet,
reverse plug. If it still does not fit, contact
a qualified electrician to install the proper
outlet. Do not change the plug in any
way.
WARNING:
To reduce the risk of fire
or shock hazard, humidifier should
be plugged into a 120V A.C. outlet.
Do not use extension cords.
To reduce the risk of electrical shock, this
humidifier has a polarized plug (one
blade is wider than the other). This plug
wiil fit in a polarized outlet only one way.