Kenmore ULTRASOFT 400 625.38845 - Manual (Page 21)

bjiiiidjdidíiid SECTION 4
www I i w i » -T
Í-tAaa
JUJJ
KNOW ABOUT YOUR WATER SOFTENER
A. DIMENSIONS/SPECIFICATIONS
Pressure Drop (PSI) vs. Flow Rate (GPM)
Flow Rate (GPM)
OTHER SPECIFICATIONS
Type of ion exchange material (resin) -- high capacity
Amount of resin (cu ft)....... ..................... 1.06
Regeneration (recharge) cycle times (minutes)
Fill (NaCL setting)............................ 3.6 -11.5
Fill (KCl setting)...... ......... -.............. 4.5 -14.4
Brining / brine rinse......................... 120-135
Backwash ---------------------------------- 7
Fast rinse...................................... .. 3
Total regeneration time .................. 133.6 - 159.4
Efficiency Rating (gr/lb at 3.1 lb salt
dose).........................................................
5360
Max. Drain Flow Rate (gpm)................... 2.0
gpm = gallons per minute
psi = pounds per square inch
gpg = grains per gallon
ppm = parts per million
© Does not include CLEAN feature cycle times if set to
ON.
This system conforms to ANSl/NSF 44 for the specific
performance claims as verified and substantiated by test
data.
The efficiency rating is only valid at the stated salt dose.
These softeners were efficiency rated according to ANSI/
NSF Standard 44.
4 - 2
Problems, Questions? Call 1-800-426-9345 Kenmore Water Line