beautypg.com

Temperature conversion, To set the clock, To set the minute timer – Kenmore 790.7156 User Manual

Page 9: Oven control functions, Setting oven controls

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

Oven Control Functions

READTHEINSTRUCTIONSCAREFULLYBEFOREUSINGTHEOVEN.

For

satisfactoryuse

ofyour

oven,

becomefamiliarwith

the various pad functions of the oven as described below.

BROIL PAD— Used to
select the variable broil

function.

CLOCK SET

PAD— Used

to set the
time of day

TIMER ON/OFF

PAD— Used to set

or cancel the minute
timer. The minute
timer does not start
or stop cooking.
Also,
TIMER ON/OFF pad

is used to set the

Continuous Bake
feature.

UP and DOWN ARROW PADS— Used aiong

with the function pads to seiect oven
temperature, time of day, clean time and

minute timer.

Iske-

-V'

SELECT SELF-CLEAN
PAD
— Used to select the
Self-Cleaning cycle. A 2,
3 or 4 hour Self-Clean
time may be selected.

OVEN, PREHEAT & DOOR LOCKED LIGHTS* —The "OVEN" light
will glow each time the oven turns on to maintain the set oven
temperature. The "PREHEAT" light will glow when the oven is first
set to operate, or if the desired temperature is reset higher than the
actual oven temperature. The "DOOR LOCKED" light will flash
when the oven door locks and unlocks or when using the Self­
Clean cycle or the oven door lockout is activated. The indicator light
will glow constantly after the door locks.

FEATU REINDICATOR
LIGHTS— These light to

show which feature is in

use.

BAKE PAD—Used to
select the bake function.

STOP/CLEAR PAD—
Used to clear any

function previously
entered except the time
of day and minute timer.

Press STOP/CLEAR to

stop cooking. Also the

STOP/CLEAR pad is
used to activate Oven
Lockout setting.

*Note; The OVEN indicator light on ihe.electronic display
will turn ON and OFF when using the Bake feature and
during preheat. This is normal and indicates that the oven
is .cycling to maintain .the selected baking temperature.
When the preheat indicator light turns OFF, your oven is

ready. ... :..:..:..:..:..:..:..:..:..:..:..:..:..:..:..:..:..:..:..:..:..:..:..:..r"

Temperature conversion

The electronic oven control is set to operate in °F
(Fahrenheit) when shipped from the factory. The oven can
be programmed for any temperature from 170°F to 550°F
(77°Cto287“C).

To change the temperature to *C (Celsius) or from °C to
°F

(control

should not be in a Bake or Clean mode);

1. Press . "--------------" appears in the display.

2. Press and hold the W until "Fll" appears in the

display.

3. Press and hold until °F or ”C appears in the display.

4.

Press the yV or 'N/' to change °F to °C or °C to °F.

5. Press any control pad to return to normal operating

mode.

Setting Oven Controls

Note: The time of day must first be set in order to operate

the oven. : ■ V ■ ■ ................. .... .... .... .... .... .... .... .... .... .... .... .

To

Set the Clock

When the range is first plugged in, or when the power

supply to the range has been interrupted, the display will

flash "12:00".

1. Press

once (do not hold pad down).

2. Within 5 seconds, press and hold the ^ or 'V until

the correct time of day appears in the display.

Note: The clock cannot be changed during a Self-Clean

cycle.

To Set the Minute Timer:

1. Press (Svo'i

2. Press the to increase the time in one minute

increments. Press and hold the >V to increase the

time in 10 minute increments. The timer can be set for
any amount of time from 1 minute to 11 hours and 59
minutes.

Note: If the 'V' pad is pressed first, the timer will

advance to 11 hours and 59 minutes.

3. The display shows the timer countdown in minutes until

1 minute remains. Then the display will countdown in

seconds.

4. When the set time has run out, the timer will beep 3

times and will continue to beep 3 times every 60

seconds until (S) is pressed.