Single surface element, Dual surface element, Warmer surface element – GE ELECTRONIC TOUCH CONTROL PP980 User Manual
Page 7: Surface elements -9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

OFF
©
OR
0
Single Surface Element
To turn on a sintjle surface element:
Touch the
ON/OFF
j>ad, then touch
^— the f+J/^Jpad.
ge.com
To turn off'a single surface element,
touch the
ON/OFF
pad again.
Use the (+)/(-) jjdd to choose the
desired power setting. The control
will beep each time a pad is touched.
I
I
S'.
I
OFF
0
OR
©
SIZE SELECT
Dual Surface Element
The dual surface element has a pan
sizing sensor which will automatical!)' set
the small or large suiface element to
match the size of your pan (see the
Using
Pan Sizing
section). To override the
automatic jran sizing sensor and select
the small or large suiface element:
VJi Touch the dual surface element
^ O/V/Off
pad.
^ Use the {+)/f-^pad to set the desired
power setting.
^ Touch the
SIZE SELECT
once to
turn on the large surface element.
Touch the pad again to turn on the
small surface element.
Wien the indicator light next to the
SIZE SELECT
pad is on, the large surface
element is on. When it is off, the small
suiface element is on.
To turn the dual surface element off,
touch the
ON/OFF
pad.
CB
su
a
sa.
D
cB*
a
3‘
«3
©
OR
0
Warmer Surface Element
To turn on the warmer surface element:
Touch the ON/OFF pad, then touch
the WARMEEpad. The suiface
element will turn on to w'amier
power setting W1 (low).
2 Use the (+)/H pvl to choose
additional settings of W2(medium)
and W3 (high).
To turn off the w'amier power settings,
touch the ON/OFF pad. To change from
the wanner settings to regular cooldng
settings, press the WARMER pad. The
surface element will be on pow'er setting
I. (low). The suiface element inav then
be set to the desired setting using the
M/f-jpads. To turn off the surface
element, touch the ON/OFF pad again.
Food Type
Control Setting
Breads/Pastries
W1
(LOW)
Sauces
W2
(Medium)
Soups (cream)
W2
(Medium)
Stews
W2
(Medium)
Vegetables
W2
(Medium)
Hot Beverages
W3
(HIGH)
Soups (liquid)
W3
(HIGH)
The chart above shows initial suggested settings
only. The temperature, type and amount of food,
and the time held will affect the quality of the
food.
CAUTION: Do not warm food on the WARMER
for more than two hours.
Do not use plastic wrap to cover food. Plastic
may melt onto the surface and be very difficult
to remove.
Use only cookware recommended for top-of-range
cooking.
The
WARMER
will keep hot, cooked food
at sening temperature. .Alwatt; start with
hot food. Do not use to heat cold food.
Placing uncooked or cold food on surface
warmer could result in foodbarne illness.
For best results, all food on the
WARMER
should be covered with a lid or
aluminum foil. Wien w'amiing pastries
or breads, the cover should be r ented to
all ow moisture to escape.
j'Uways use potholdeix or oven mitts when
removing food from the
WARMER
as
cookware and ¡jlates will be hot.
A hot surface indicator light will glow'
when the glass suiface is hot and tvil!
remain on until the surface has cooled
below' l.aO°F.