Before you call for service – GE ELECTRONIC TOUCH CONTROL PP980 User Manual
Page 16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

S’
•S
ft
ft
ft
CO
■ft
ft
ft
I
c2
Before you call for service.
Troubleshooting Tips
Save time and money! Review the charts on the following
pages first and you may not need to call for service.
Problem
Possible Causes
What To Do
TEMP appears
in the display
Cooktop too hot and the
time-out feature activated.
• Allow the
S t
1 hour befo
irface element(s) to cool for 1/2 to
re usioi^ again.
Surface element is
glowing red when it
should be on a low
power setting
The rapid heat-up feature
activated.
• The cooktop has a rapid heat-up feature and is
designed to do this. See the Radiant surface elements
section.
"F" and a number
You have a fault code.
• Write down
the “F” and the number and touch
appear in the display
and the cooktop
produces an audible
sound ........................
the CONTROL LOCK pad. See the Fault code section.
16